Desoutter 6151655290, Руководство пользователя

Страница: 7 / 101

EN Product Instructions
03/2021 7 / 101
Installation
Installation instructions
The DJS simulates the joint behavior. Install the DJS on a PST
– Pulse Static Transducer
to test power and
impulse tools.
Each
DJS simulates a specific stiffness as described in its torque/angle characteristics.
The DJS is identified by the two colored rings.
For more information about the PST
– Pulse Static Transducer , refer to “
PST
– Pulse Static Transducer
Product Instructions
” (Desoutter User Guides are available at
http://www.desouttertools.com/resource-centre ).
To install the DJS on the PST
– Pulse Static Transducer
, do the following:
1. If necessary, for PST
– Pulse Static Transducer
models with a capacity over than 10Nm, loosen the
lever.
2. Insert the DJS into the socket of the PST
– Pulse Static Transducer.
3. For PST
– Pulse Static Transducer
models with a capacity over than 10Nm, tighten the lever.
WARNING Risk of injury
Before starting a test, make sure that the DJS is correctly installed on the PST
– Pulse Static
Transducer.
1 2 3