2050504723
Issue no: 16
Series: D
07/2015
25 / 68
MAINTENANCE INSTRUCTIONS
●
Service should be carried out at intervals of
1000 hours’use. Always quote tool model
number, serial number and spare part
number when ordering spares.
● All torque figures ± 10%.
●
Overmould should be wiped clean with a
general purpose, nonaggressive degreasant.
●
●
●
Indicates direction of dismantling.
When disposing of components,
lubricants, etc... ensure that the relevant
safety procedures are carried out.
WARNING
Never connect a part assembled tool to
the air supply. The rotor blades in this tool
have a PTFE content. The normal health
and safety recommendations concerning
PTFE must be observed when handling
these rotor blades.
●
Do not smoke.
●
Motor components must be washed
with cleaning fluid and not blown clear
with an air line.
●
The silencer must be replaced when
dirty, do not clean and re-use.
●
Wash hands before commencing any
other activity.
