This Manual is applicable to
Revised January 18th 2017
De Sisti SUPER LED F10 Vari White
Pag 5.
DEFAULT SETTINGS ARE INDICATED IN BOLD LETTERS ON THE FOLLOWING TABLE:
The following are the BASIC FUNCTIONS and COMMANDS that are provided on the LOCAL MENU of the LED
FRESNEL. The unit is provided with a USER MENU accessible instantly on the product.
1st MENU
Displayed
2nd MENU
Displayed
Explanation of Each MENU FUNCTION
When the DISPLAY is in STAND BY Mode, please
press KNOB 2 (Sel) to access this MENU….then rotate
KNOB 2 and press it when the DMX addr is selected
Rotate KNOB 2 to decide the DMX address and then
push to select it.
DMX ADDRESS
This Function is to SET the DMX address from 1 to 512
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the DMX addr Menu, select the
preferred base DMX Address and Select it.
Once the DMX Address is SET, in order to return to the MAIN MENU, it is necessary to
rotate KNOB 2 counter-clock-wise to return to the EXIT item and then select it by
pressing KNOB 2 itself.
CHANNEL SETTING (RESOLUTION & FUNCTION)
This Function is to set the DIMMING RESOLUTION either at 8 bits or at 16 bits.
Select DMX resol by rotating and pushing KNOB 2, the following choises are available:
•
8 bits resolution (the display will show 8 bit).
The Fixture utilises 1 DMX Circuit for the Light Dimming, which is the
BASE CIRCUIT set in the ADDRESS,
•
16 bits: 16 bits resolution (the display will show 16 bit and this is the default setting).
The Fixture utilises 2 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS is the Coarse Dimming,
the second Circuit (BASE +1) is the Fine Dimming.
Of course to benefit of the 16 bits function the corresponding circuits on the DMX
LIGHTING BOARD shall also be set at 16 bits.
•
The DMX channels BASE +2 and BASE +3 are dedicated to the CCT Variation
Control as described previously
When the DISPLAY is in STAND BY Mode, please
rotate KNOB 2 to act on the LIGHT INTENSITY
Dimming…Clock Wise to increase the level and
Counter Clock Wise to decrease it. Fine control:
1 full TURN of the KNOB 2 = 5% Dimming Variation
For faster Dimming Control keep KNOB 1 pressed
and rotate KNOB 2:
1 full TURN of the KNOB 2 = 40% Dimming Variation
LOCAL DIMMING CONTROL
This Function is to LOCALLY DIM the LED INTENSITY from 0 to 100% (Product is delivered
with default setting of the DIMMER at 0).
The right knob is doing the dimming action and it goes with a fine tuning in normal condition, or
a fast dimming when rotating KNOB 2 while keeping KNOB 1 pressed in.
When the DISPLAY is in STAND BY Mode, please
rotate KNOB 1 to act on the CCT variation from
2.750°K to 6.900°K…Clock Wise to increase the CCT
and Counter Clock Wise to decrease it.
The CCT value is shown on the DISPLAY.
LOCAL CORRELATED COLOUR TEMPERATURE
CONTROL
This Function is to LOCALLY ADJUST the CORRELATED COLOUR TEMPERATURE from
2.750°K to 6.900°K (Product is delivered with default setting of the CCT at 2.750°K).
The rotation of KNOB 1 will determine CCT increments according to the following table (STEP
MODE).
If a continuous CCT adjustment is required (LINEAR MODE) it is necessary to operate through
a DMX Console: please see DMX parameters above.
