V6.3
Smart Entry
TM
Model 20083 / 25583
Model 20084 / 25584
Installation Manual
7955 Cameron Brown Court
Springfield, Virginia 22153 USA
Tel: 703-866-2000 ; Fax: 703-866-2001
Page 2 20083 / 20084
Congratulations on your purchase of the Smart Entry
tm
from DesignTech.
Smart Entry
tm
Protects You:
Lock and unlock your doors & trunk by remote control.
Optional Features Include (external relays necessary):
Car Locator
Remote Panic/Rescue alarm
Turn on your domelight by remote control.
Starter-kill to prevent vehicle from being stolen.
Additional alarm input for other sensors.
Passive or active operation (also locks doors).
This system allows for a very quick installation using the generic harness (part
#27004) or with 'plug-in' vehicle specific harnesses. The transmitter which comes
with the unit is already programmed to the receiver and includes a long life lithium
battery that will last many years.
CONTENTS:
Model
20083
20084
25583
25584
Smart Entry
tm
Module
YES
YES
Transmitters (3 button)
1
1
Parts Baggie
Yes
Yes
Type of Lock and Unlock Outputs
Transistor
Relay
Contained in the baggie:
4 cable ties
2 "Protected by DesignTech" window stickers
Tools Required:
Set of screw drivers
Drill and 1/2" drill bit for switch hole
Wire cutter and strippers
Crimping tool
Soldering iron and solder
Test / Volt meter
Smart Entry
tm
model 20084 has 2 built-in relays to control Lock and Unlock.
All other outputs are negative transistor outputs (-400mA) and require external
relays.
