79 Trenton Avenue, Frenchtown NJ 08825
© Copyright 20
20
Designplan Lighting, Inc.
installation instructions
1 of
7
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO
PERSONS. READ ALL INSTRUCTIONS. IMPORTANT SAFETY
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE
INSTALLATION! Please read all instructions before installation.
FLAI
IP
54
5VDC
• Keep these instructions for future reference.
•
Designplan is not responsible for fixtures installed without
regard to these
standards.
• Unauthorized alterations or tampering of product voids warranty.
•
The main power connection must be in accordance with local electrical
codes.
• Suitable for INDOOR applications.
Maintenance
Scheduled maintenance must be carried out once a year on all lighting devices, regardless of appliance
class and type of use. It must include the following operations:
• Periodically clean fixtures to remove dirt from gratings and screw heads.
• Check tightness of screws on various parts of the device.
• Check that all cable glands and cables are intact and tight. Check that the glass or plastic
lens
is
intact, and replace it if broken or damaged.
• The internal components such as the ballast,
driver,
washers and screws must not show clear
signs
of oxidation or rust. Clear traces of rust and oxidation will indicate the presence of water inside
the
device.
• In the case of damage, the components must be replaced by original components or spare parts.
P: 908-996-7710
F: 908-996-7042
