+DESIGN
Pag. 1 - rev.00
BRIGHT 2.6 - 2.7
-ACQUASTOP-
Installation instructions
IP67
Kg0.50
WARNING!!!
Please read the following instructions carefully.
ELECTRICAL CONNECTIONS:
•
LED lights run at constant current.
•
LED lights must be
connected in parallel
respecting polarities.
•
As for the choice of the power supplies, please consider the tension
through which they are fed and the max power consumption of
LEDs you have to install.
•
The system must be fed only if all the spots are connected.
•
The power supplies must be installed in aerated rooms, far from heat
sources. A situation of overworking or a lack of air circulation will not
permit a natural dissipation.
•
Under no circumstance must this product be covered by thermalisolating
material or similar.
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
IMPORTANT:
•
Although LED runs on a very low voltage, always cut off the power sup-
ply before installing the LED light or subjecting it to maintenance.
•
Unauthorised alterations or tampering of the product will invalidate all
the conditions of guarantee.
•
This fixture must be installed by a qualified electrician.
•
Designplan
is not resposable if its fixtures are not installed in
according to local safety standards.
•
Data contained in this document may be changed at any moment with-
out prior notice.
NOTES:
•
Wire connections must be made with water-proof wire
nuts or similar.
3.35"
3.15"
3.35"
3.35"
3.15"
