Designability WizzyBug, Инструкция по эксплуатации

Страница: 23 / 72

23
7. Release your thumb so that the pins fit into the top row of
holes. Move the seat downwards one hole at a time towards
your child’s chosen position by doing the same actions again:
squeeze the seat release knob, move the seat down to the
next set of holes and release the pins into the holes. Repeat
this until the seat is in your child’s chosen tilt -in-space
position, e.g. the third hole from the top
8. Turn the white dial fully
clockwise to lock the seat into
position, with the black spot at
the bottom of the dial. If the seat
cannot easily be locked, check
that the pins are sitting properly
in the holes and try again. Never force the white dial if it does
not lock easily.
Do not use the seat unless the white dial is fully locked.
9. Plug the joystick and carer
control cables into the two
sockets at the back of Wizzybug.
Both sockets are the same, but
the connectors can only fit in one
way up.
Fig. 17 Joystick and Carer Control Cables
10. Hook the carer control onto the back of the headrest and tuck
the cables away behind the seat.
Fig. 16 Seat Locking Dial