ORWL User Guide Document
Step 6: Display user pin entry message
Once PIN verification is successful, a message “Set your PIN” followed by PIN verification message is
displayed.
Step 7: Press power button on the ORWL
This is same as step 3 to proceed with next step.
Step 8: Enter user pin
Enter 6-digit custom user PIN to be set. The UI contains all the digits followed by a backspace icon. A
cursor pointer is also available which shifts from digits to digits sequentially as user presses the
power button. PIN digits need to be selected by pressing the power button continuously. Once a
digit is selected by moving the cursor to that digit, stop pressing the power button for some time
until the digit is written to the UI. The UI is the same as figure displayed in step 4.
