P
ause Jul
y 2010
Aluminium Tray Installation
Pause Drawer Installation
1
1
The Pause drawer is supplied pre-assembled onto the Pause shelf. To attach
the shelf and drawer onto the headboard, hold the shelf and drawer together
and insert into the headboard extrusion as shown.
If shelf includes a side lamp or iPod/Bose accessories, ensure all cables are
feed over the top of the back face of the drawer and through the head tie rail
cable hole.
If installing a side lamp, do this once the shelf and drawer are fixed onto the
headboard. Once the lamp base is sitting into the shelf, open the drawer fully
to enable the cord to be feed from out behind the drawer and through the
head tie rail cable hole (see also “lamp installation” of these instructions).
NOTE: If attaching aluminium tray to a previously assembled lamp, ipod or
Bose shelf, ensure all cables are unplugged and pulled back through cable
hole in headboard tie rail. After installation of aluminium tray feed cables
through hole in tray and back through headboard tie rail cable hole.
Align holes on aluminium tray to holes on underside of shelf. Fasten
aluminium tray to shelf using M6 bolts and tighten with allen key.
