background image

iPod, Bose Shelf Accessories, Tray, Drawer, 

Side Lamp & Task Lamp.

Design Mobel (New Zealand)

PO Box 1142, 130 Maleme Street, Tauranga 3140, New Zealand
Ph: +64 7 543 3660
Fax: +64 7 543 3669
Freephone 0800 337 446

Design Mobel (Australia)

48 Alexandra Place, Murarrie, QLD 4172, Australia
Freephone 1800 194 510 
Fax: +61 7 3902 8810

www.dm.co.nz

After usng the bed for one week, fittings should be re-tightened.

NOTE: If you have questions assembling your bed, please call your retailer or our 
customer services number below. 

Recommended care for your bed:

• Avoid placing in direct sunlight or next to heating apparatus.
• Do not leave wet objects, nail polish or perfumes on polished surfaces.
• Rotate the position of your slats over the length of the bed frame at six monthly intervals.
• Care for your Design Mobel mattress by following the instructions on the mattress care label 
(underside of matress) .
• Keep assembly instructions and tool(s) for ease of resassembly when moving.
• Use the complimentary care cloth provided to clean yoiur frame. 

Warranty

• Register your warranty card online at www.dm.co.nz
and receive your free $50 linen and bedding voucher. 

Thank you for choosing a Design Mobel. As part of our longstanding plant a tree policy as a 

direct result of your purchase, we will shortly be planting a native tree at a school. 

For information including product care and maintenance please refer to the brochure also 

enclosed in product packaging. Register your product/s online at 

www.dm.co.nz

 to receive 

your free $50 Design Bodyfit™ linen voucher. 

A S S E M B L Y   I N S T R U C T I O N S

NOTE:

  

Never drag your Design Mobel bed as it may cause damage or break the bedframe.

Содержание Pause









Отзывы: