2
A.
IMPORTANT INFORMATION and WARNINGS
-
Protect all parts of the system from water and heat. This product must be installed by DESi
authorized services.
-
If there is a fault in your system, please contact DESi authorized technical services as soon as
possible. Do not allow to interfere your device anyone other than the authorized service.
Accident, breakdown, etc. which may occur due to unauthorized services. DESI is not responsible
for that kind of situations.
-
If the PWR LED is blink for 2 times in the standby and you hear buzzer sounds after arming, that
means device is not receiving power. If you hear this warning tone please check the electrical
connection. Take the necessary precautions to prevent your ears from being damaged by the
alarm sound during assembly.
-
If a GSM card will be installed in the system, the pin query of the sim card should be canceled and
the sim card should be inserted into the device before powering the alarm system.
B.
CLEANING AND MAINTENANCE
-
Parts of the system can be cleaned with a dry cloth. During cleaning of the detectors, be careful
not to change their direction and damage their connections.
-
When replacing batteries, cleaning and maintenance, do not damage the electronic cards of the
central unit and other parts. Do not touch electronic cards with metal, piercing / cutting tools.
-
You can get help from DESi authorized services for all battery changes.
Central Control Unit
Your device has a battery that can operate the system for approximately 2 days to prevent power
failures. It is recommended to replace this battery once, every 2 years.
Remote Controller
Remote control is powered by CR2032 3V battery. To replace the batteries of the device, unscrew
the small screws on the back of the controller and detach the bottom cover. Replace the battery of
the device, place the bottom cover and tighten the screws.
Sens
ors
Battery life of wireless sensors may differ depending on the sensor type and frequency of use.
DESi recommends replacing the wireless sensor batteries every 3 years at the latest.
C. ENERGY EFFICIENCY
DESi develops custom designs to reduce energy consumption. Faulty sensors and improper use
of system will give false alarm signals, that may increase the current consumption. In order to
avoid false alarms, the operating manual should read in detail and any faulty sensors should be
repaired or replaced.
D. INSTALLATION DIAGRAM
The product must be installed by DESi authorized service.
DESi
220V
AC
Indicators on the Central Unit
Power
Status
Wi-Fi
Status
Bluetooth
Status
GSM
Status
GPRS
Status
