TB-3041
Page 2 of 6
© 2009 DESCO INDUSTRIES, INC.
Employee Owned
Features and Components
DIGITAL STATIC FIELD METER
D. POWER Button:
Press to turn the unit ON and OFF.
E. 4mm Stud:
Use this stud to ground the Meter using
a 4mm ground cord (not provided - any standard single
wire wrist strap cord can be used).
F. Battery Cover:
Slide the cover down to open the 9V
battery compartment.
CHARGER
Figure 2. Digital Static Field Meter features and
components
A
B
C
D
FRONT VIEW
BACK VIEW
E
F
A. HOLD Button:
Press to freeze the reading on the
display. Press again to return to normal measurement
operation.
B. RANGE / ZERO Button:
Press to select the
measurement range. Press and hold to zero the Meter.
C. Analog Output Jack:
A low-voltage replica of the
measured voltage is provided at this output. The voltage
at this output is 1/1000th (±2 kV range) or 1/10,000 (±20
kV range) of the measured voltage.
FRONT VIEW
BACK VIEW
A
B
C
D
Figure 3. Charger features and components
A. Output Contact:
The output contact is connected to
an internal power source. When the touch plate located
underneath the unit is connected to ground, the output
contact will provide a charge of the indicated polarity.
The charger is designed so that an operator can press
the rocker switch and touch the plate simultaneously
with the fingers of the same hand.