background image

TB-2082

 Page 6 of 6

© 2009 DESCO INDUSTRIES, INC.

Employee Owned

Limited Warranty

Desco expressly warrants that for a period of one (1) year from the date of purchase Desco Monitor Calibration Units will be free of defects in 

material (parts) and workmanship (labor).  Within the warranty period, a credit for purchase of replacement Desco Monitor Calbiration Units, or, 

at Desco’s option, the Monitor Calibration Unit will be repaired or replaced free of charge.  If product credit is issued, the amount will be 

calculated by multiplying the unused portion of the expected one year life times the original unit purchase price.  Call our Customer Service 

Department at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material Authorization (RMA) and proper shipping 

instructions and address. Please include a copy of your original packing slip, invoice, or other proof of date of purchase.  Any unit under 

warranty should be shipped prepaid to the Desco factory.  Warranty replacements will take approximately two weeks.
If your unit is out of warranty, call our Customer Service Department at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return 

Material Authorization (RMA) and proper shipping instructions and address.  Desco will quote repair charges necessary to bring your unit up to 

factory standards.

Warranty Exclusions

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED, 

INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. 

The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly 

maintain, clean or repair products.

Limit of Liability

In no event will Desco or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use of or 

the inability to use the product.  Before using, users shall determine the suitability of the product for their intended use, and users assume all 

risk and liability whatsoever in connection therewith.

 

99 Washington Street 
Melrose, MA 02176 

Phone 781-665-1400

Toll Free 1-800-517-8431

 

Visit us at www.TestEquipmentDepot.com

Содержание TB-2082







Отзывы: