Desco SCS 966-II Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 8

Desco SCS 966-II Скачать руководство пользователя страница 2

DESCO ASIA

© 2019 DESCO INDUSTRIES INC

TB-9096 Page 2 of 8

Employee Owned

1. Safety Precautions:

Read this instruction manual before installation, wiring, operation, or maintenance of the product in order to achieve
maximum performance. Improper use of this product may cause an accident resulting in injury or death, or may lead to a
malfunction of this product. Our company will not be held liable for any usage outside this product Specifications or any
accident caused by noncompliance with the Safety Precautions.

Danger

Failure to follow instructions may lead to death or serious injury.

Warning

Failure to follow instructions may lead to injury.

Caution

Failure to follow instructions may lead to product damage (product malfunctions, etc.).

2. Precautions for CE Marking:

This product complies with the following EU Directives and EN standards:

・

EMC Directives: EN61000-6-2 / EN61000-6-4

・

Low-voltage Directive: EN61010-1

・

Overvoltage Category (Installation Category): I

・

Pollution Degree: 2

・

When selecting a power supply for use with this product, always use a power supply that has been certified

by an EU Notified Body (as a Limited Power Source as defined in IEC/EN60950-1 or IEC/EN61010-1) or
optional AC adapter.

・

Use only the power supply and signal cable included with the product to connect this product to the power

supply.

・

Install this product in accordance with the installation and wiring instructions described in this instruction

manual.

3. Operation:

This IONIZER consists of the following parts: The 966-II, optional nozzles, an electrode, and a high-voltage transformer.
The ionizer displays a warning when there are abnormal conditions. It applies high-frequency-high-voltage from the high-
voltage transformer to the discharge needle inside, giving off alternating current corona discharges toward the optional
nozzle, and produces positive and negative air ions. It transfers the air ions through the air. The ionized air neutralizes the
static of charged objects located nearby, and removes dust that is on charged objects. One benefit of this ionizer is that it
can transfer ionized air by using the optional air tube, in addition to air blowing directly through the air nozzle. The nozzle
can fit the main unit.

Appearance:

«
1
2
3
4
...
»

Содержание SCS 966-II









Отзывы:

Нет отзывов