2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
Technical Service and Parts:
1-866-672-6040
119793-01
Rev. B
09/06
NOT A UPC
119793 01
Figure 10 - attaching Fireplace to mantel Base
Shoulder
Screw
Assembled
Trim
Figure 9 - Inserting Fireplace Into Cabinet mantel
INSTAllING FIREPlAcE
1. Fireplace should be fully assembled. See
Assembling
Fireplace
in fireplace owner’s manual.
2. Install gas line. See
Connecting To Gas Supply
in fire
-
place owner’s manual. Remember to leave access to
the gas shutoff valve somewhere on the base or where
it is accessible to the user.
3. Check for leaks. See
Checking Gas Connections
in
fireplace owner’s manual.
4. Position firebox inside mantel, carefully positioning gas
lines (see Figure 9).
IMPORTANT:
Use caution when
positioning fireplace on mantel base. Base may scratch
easily.
O
F
F
P
ILO
T
O
N
H
I
L
O
Hole for Attaching
Fireplace to Wooden
Mantel Base
Bottom Louver
Door
5. Place trim kit on the shoulder screws located on the
side and top of the fireplace. Firmly snap the trim over
the shoulder screws on fireplace (see Figure 9). Align
fireplace in mantel assembly so that the trim overlaps
the mantel evenly on all three sides.
6. Lower bottom louver door. Use two 3" wood screws pro-
vided in hardware package and attach fireplace base to
wooden base (see Figure 10). Close louver door.
