121498-01
Rev. A
06/07
Figure 7 - assembling trim
Side Trim
Slot
Top Trim
Mitered Edge
Shim
Set Screws
Adjusting
Plate
Slot
AssemblING PeRImeteR tRIm
1. Remove packaging from three pieces of metal trim.
2. Locate two adjusting plates with set screws, and two
shims in the hardware packet.
3. Align shim under adjusting plate as shown in Figure 7.
4. Slide one end of adjusting plate/shim in slot on mitered
edge of top trim (see Figure 7).
5. Slide other end of adjusting plate/shim in slot on mitered
edge of side trim (see Figure 7).
6. While firmly holding edges of trim together, tighten both
set screws on the adjusting plate with slotted screw-
driver.
7. Repeat steps 2 through 6 for other corner.
electRIc FIRePlAce INstAllAtION
This mantel can be used with DESA Heating Products 26"
Electric Fireplace. Electric fireplaces install from the front of
mantel. To install electric fireplace see fireplace instruction
manual. Use caution when positioning fireplace on base.
Base may scratch easily.
DESA Heating, LLC
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
www.desatech.com
