Desa Vanguard VVDR18, Руководство владельца по эксплуатации и установке

Страница: 5 / 28

www.desatech.com 124183-01B 5
Figure 1 - Product Identification (Dual Burner Shown)
Hearth Kit Model ___________________
Serial Number _____________________
Log Set Model _____________________
Grate
Burner
Pan
Burner Manifold
Burner Inlet
Fitting
Burner Clamp
Grate
Steps
OPTIONAL PRODUCT FEATURES
PRODUCT IDENTIFICATION
ON/OFF SAFETY VALVE/PILOT KIT
AND PROPANE/LP CONVERSION
An optional valve/safety pilot kit with a piezo
ignitor is available for this appliance. This sys
-
tem requires no matches, batteries, or other
sources to light. You must use this optional
system for LP conversion. See
Accessories ,
page 24.
REMOTE CONTROL READY
(MILLIVOLT) SAFETY VALVE/
PILOT KIT
An optional millivolt valve/safety pilot kit with
a piezo ignitor is available for this appliance.
This system requires no matches, batteries,
or other sources to light. This system may
be connected to a wall switch or hand-held
wireless remote control. See
Accessories ,
page 24.
REMOTE CONTROL ACCESSORIES
There is an optional hand-held ON/OFF re -
mote control that can be purchased separately
for this log set. You must use the millivolt
valve/safety pilot kit to use remote acces
-
sories with this appliance. See Accessories ,
page 24.
A wall switch is also available for this appli
-
ance. You must use the millivolt valve/safety
pilot kit to use the wall switch with this appli
-
ance. See Accessories , page 24.
INSTALLATION
CAUTION: Do not remove
the data plates attached to the
burner pan. The data plates
contain important warranty and
safety information.
WARNING: Before installing
in a solid fuel burning fireplace,
the chimney flue and firebox
must be cleaned of soot, creo -
sote, ashes and loose paint by a
qualified chimney cleaner. Creo -
sote will ignite if highly heated.
A dirty chimney flue may create
and distribute soot within the
house. Inspect chimney flue for
damage. If damaged, repair flue
before operating heater.