www.desatech.com
110749-01E
4
ProdUCt sPeCiFiCations
Figure 1 - Firebox Dimensions
Side View
Firebox Top View
Front View
ProdUCt FeatUres
opeRAtIoN
This firebox is designed for use with approved
ANSI Z21.11.2 decorative type unvented room
heaters. (Physical size limitations apply. Refer
to minimum firebox requirements supplied
with log heater.) It requires no outside vent
-
ing or chimney making installation easy and
inexpensive. When used without the blower,
the firebox requires no electricity making it
ideal for emergency backup heat.
refraCtorY BriCK liner
Your firebox features a concrete refractory
brick liner. As with all concrete liners, this liner
may develop slight cracks when exposed to
heat. These cracks will not affect the perfor
-
mance of the fireplace or vent-free gas logs.
loCating FireBox
plANNING
Plan where you will install the firebox. This will
save time and money later when you install
the firebox. Before installation, consider the
following:
1. Where the firebox will be located. Allow for
wall and ceiling clearances (see
Installa-
tion Clearances
, page 8).
2. Everything needed to complete installation.
3. These models CANNOT be installed in a
bedroom unless the maximum Btu rating
of the installed vent-free log set is less
than 10,000 Btu/hr.
4. Proper air for combustion and ventilation
(page 5).
