4. Drop staples in channel (see Figure 4).
Note:
We recommend that you only use PowerFast or Swingline heavy-
duty staples in this tool.
Wrong staples can cause jamming.
5
Slide staple chamber cover closed. Make sure cover locks into place.
Figure 4
Staples
1. Make sure trigger lock is in the
OFF position.
2. Plug tool into a 115 Volt/60
Hertz outlet.
3. Grip tool firmly.
4. Slide trigger lock to the ON
position.
Operating Tool
Trigger
Lock
Figure 5
!
WARNING ICON
G 001
WARNING: Keep trigger lock in the OFF position and finger off
trigger until ready to drive staple.
!
WARNING ICON
G 001
WARNING: Keep all body parts away from staple exit on tool.
