3
Figure 3
3. While holding handle down, slip handle lock up over
handle (see Figure 3).
Handle
Handle
Lock
Figure 6
Figure 5
Operating Tool
1. Unlock handle if locked.
2. Grip tool firmly. Press
tool against work
surface (see Figure 5).
3. Depress handle firmly to
fire. Do not allow tool to
jump or recoil.
Note: For
greater driving force on
harder surfaces, press
thumb or palm of free
hand against head of
tool (see Figure 6).
Loading Tool
1. Lock handle (see Locking
Handle, page 2).
2. Turn staplegun upside down. At
rear of tool, squeeze latch on
end of staple channel (see Fig-
ure 4). Pull staple channel cover
out of staple channel until it stops
(see Figure 4).
3. Drop staples into staple
channel. Make sure staple
points are facing up (see
Figure 4).
4. Slide staple channel cover
back into staple channel until it
locks into place.
Staples with
Points Facing Up
Staple Channel
Figure 4
Staple Channel Cover
