114418-01A
For more information, visit www.desatech.com
For more information, visit www.desatech.com
5
5
Figure 10 - Applying English and French Conversion Labels
over Existing Certification Labels on Lighting Instruction Plate
CONVERSION INFORMATION LABEL
This appliance was converted on
(name and address of organization making
this conversion), which accepts the
responsibility that this conversion has been
properly made.
Day
Month
Year
–
–
to
gas
with Kit No.
by
106080-01
56060
Figure 12 - Conversion
Information Label
English This Side
French This Side
Figure 11 - Print Previous
Model Number on Conversion
Labels
Lighting Instruction Plate
CONVERSION LABELING AND PLACEMENT
1.
Apply the English and French conversion labels over the top of the
existing certification labels (see Figure 10). Existing certification
labels are located on the lighting instruction plate inside the gas
valve compartment area. With permanent ink, print the previous
model number on the label in the space provided (see Figure 11).
2.
After filling in the data required on the conversion informa-
tion label (see Figure 12), affix it to the floor of the appliance
where it is easily seen when the lower louver is removed.
WARNING: Never use an open flame to check for
a leak. Apply noncorrosive leak detection fluid to all
joints. Bubbles forming show a leak. Correct all leaks
at once.
WARNING: This conversion kit shall be installed
by a qualified service agency in accordance with the
manufacturer’s instructions and all applicable codes
and requirements of the authority having jurisdic-
tion. If the information in these instruction is not
followed exactly, a fire, explosion, or production of
carbon monoxide may result causing property dam-
age, personal injury, or loss of life. The qualified
service agency is responsible for the proper installa-
tion of this kit. The installation is not proper and
complete until the operation of the converted appli-
ance is checked as specified in the manufacturer’s
instructions supplied with the kit.
FINAL PREPARATION
1.
Reinstall logs. Refer to
Installing Logs, Lava Rock and Glow-
ing Embers
in owner’s manual.
2.
Leak check the gas control and any connections you've made
before operating the appliance. Refer to
Checking Gas Con-
nections
in owner’s manual.
3.
Close and latch door.
4.
Replace screen and reinstall louver panels.
The conversion is now complete.
To operate your fireplace, refer to
Operating Fireplace
in your
appliance owner’s manual.
WARNING: Test all gas piping and connections,
internal and external to unit, for leaks after installing
or servicing. Correct leaks at once.
VENTED GAS FIREPLACE
Conversion Kit Model
Type of Gas
Previous Model #