www.desatech.com
116462-01A
2
2. Carefully lift up and remove one-piece log set.
3. Install rear firebrick panel on back wall first.
Rest the bottom edge of firebrick panel on
base assembly. Stand firebrick panel straight
up against the back of fireplace (see Figure 2).
Note:
Side brick liners will hold rear firebrick
in place.
CAUTION: Always handle
firebrick panels with two hands.
Do not force firebrick panels into
place. Excessive force will break
firebrick panels.
4. Carefully slide left side firebrick panel into
fireplace. Gently press the firebrick panel back
against the side wall (see Figure 3).
5. Secure side firebrick panel to side wall of
fireplace with one retainer bracket and screw
(see Figure 4, page 3).
Note:
If there is a screw in the fireplace side
walls where you are to install the retaining
bracket, remove screw.
Figure 3 - Placing Side Firebrick Panel in
Fireplace
Side Firebrick
Panel
Side
Wall
Figure 2 - Placing Rear Firebrick Panel in
Fireplace
Rear
Firebrick
Panel
6. Repeat steps 4 and 5 to install right side fire-
brick panel.
7. Replace log set. Make sure log set is put in
the proper position. See
Installing Log
in the
fireplace owners manual.
8. Replace screen (see Figure 1, page 1).
