105573-01B
For more information, visit www.desatech.com
For more information, visit www.desatech.com
3
3
6.
Align screw holes in side panels with holes in top panel (see
Figure 5). Insert and tighten #10 Phillips screws.
7.
Reinstall louver removed in step 4.
8.
Carefully inspect fireplace surround assembly. Make sure
each part fits properly. Firmly tighten all screws installed
during assembly.
CAUTION: Do not overtighten. Metal can bend,
warp, or break under excessive strain.
Figure 4 - Attaching Top Surround Panel
Figure 5 - Attaching Side Panels to Top Panel
Top Surround
Panel
Top Panel
Side Panel
Phillips
Screws (4)
9. Remove three pieces of surround trim from packaging.
10. Locate four #6 screws, two adjusting plates with set screws,
and two shims in the hardware packet.
11. Align shim under adjusting plate as shown in Figure 6.
12. Slide one end of adjusting plate/shim in slot of top surround
trim (see Figure 6).
Slot
Side Surround
Trim
Top Surround
Trim
Set
Screws
Adjusting
Plate
Slot
Mitered Edge
Figure 6 - Assembling Surround Trim
Shim
Mitered
Edge
Top Edge of
Fireplace Insert
Phillips Screws
13. Slide other end of adjusting plate/shim in slot on mitered edge
of side surround trim (see Figure 6).
14. While firmly holding edges of trim together, tighten both set
screws on the adjusting plate with slotted screwdriver.
15. Repeat steps 11 through 14 for other side.
16. Line up holes in surround trim with holes on side panels of
fireplace surround assembly. Attach with screws provided (see
Figure 7).
17. Move heater and surround assembly to fireplace opening.
Make sure heater and surround assembly fit properly.
WARNING: A qualified service person must in-
stall gas piping to heater. Follow installation instruc-
tions included in fireplace insert owners manual and
all local codes.
Proceed with installation instructions included with unit.
Figure 7 - Attaching Trim to Fireplace Surround
#6 Screws (4)
Trim
Fireplace
Surround