background image

111826-02C

For more information, visit www.desatech.com

4

1.    Remove log set as sem bly from carton. 

Note:

 Do not pick up  

assembly by logs. This could dam age the unit. Always handle 
assembly by grate. 

2.    Remove control cover fl oor media components & remote 

control if supplied.

3.    Remove all protective packaging ap plied to log set for ship-

ment.

4.     Check all items for any shipping dam age. If damaged, prompt ly 

inform deal er where you bought appliance.

UNPACKING

  CAUTION: Do not remove the data plates from the 

grate assembly. The data plates con tain im por tant 
warranty and safety in for ma tion.

AIR FOR COMBUSTION AND 
VENTILATION

Today’s homes are built more energy ef fi  cient than ever. New ma te ri als, 
increased in su la tion, and new construction methods help reduce heat 
loss in homes. Home own ers weather strip and caulk around windows 
and doors to keep the cold air out and the warm air in. During heating 
months, home owners want their homes as airtight as pos si ble.

While it is good to make your home energy effi cient, your home 
needs to breathe. Fresh air must enter your home. All fuel-burning 
appliances need fresh air for proper com bus tion  and  ven ti la tion.

Exhaust fans, fi replaces, clothes dryers, and fuel burning appliances 
draw air from the house to operate. You must provide ad e quate  fresh 
air for these ap pli anc es. This will insure proper venting of vented 
fuel-burning appliances.

  WARNING: This appliance shall not be installed in 

a confi ned space or unusually tight con struc tion un-
 less pro vi sions are pro vid ed for ad e quate com bus tion 
and ven ti la tion air. Read the fol low ing in struc tions to 
in sure prop er fresh air for this and other fuel-burning 
ap pli anc es in your home. 

PROVIDING ADEQUATE VENTILATION 

The following are excerpts from National Fuel Gas Code, ANSI 
Z223.1/NFPA 54, Sec 

tion 5.3, Air for Combustion and Ven 

ti 

-

la tion.

All spaces in homes fall into one of the three following ventilation 
classifi cations:
1.    Unusually Tight Construction
2.    Unconfi ned Space
3.    Confi ned Space

The information on pages 4 through 6 will help you classify your 
space and provide ad e quate  ven ti la tion. 

Unusually Tight  Construction

The air that leaks around doors and win dows may provide enough 
fresh air for combustion and ventilation. However, in buildings of un-
usually tight construction, you must provide additional fresh air.

OPTIONAL REMOTE CONTROL ACCESSORIES
UNPACKING
PRODUCT FEATURES
AIR FOR COMBUSTION AND VENTILATION

OPTIONAL REMOTE CONTROL 
ACCESSORIES

PRODUCT FEATURES

REMOTE READY & REMOTE CONTROLLED

This unitized gas log set is tested and approved to ANSI Z21.60a 
and CSA 2.26a-2000 as a vented decorative appliance. This log set 
has a piezo ignitor . This system requires no matches, batteries or 
other source to light log set.

SAFETY DEVICE

This unit has a pilot with an Oxygen Depletion Sensing (ODS) 
safety shutoff sys tem. The ODS/pilot shuts off the appliance if there 
is not enough fresh air.

PIEZO IGNITION SYSTEM

This unit has a piezo ignitor. This system requires no matches, bat-
teries, or other sourc es to light appliance.

There are two optional remote controls that can be purchased sepa-
rately for Remote-Ready Models:
•    wall switch                     •    hand-held ON/OFF remote 
See Accessories, page 22.

The wall thermostat or hand-held ther mo stat may not be used with 
vented  dec o ra tive  appliances.

Unusually tight construction is de fi ned as construction 
where:

a.    walls and ceilings exposed to the outside at mo sphere 

have a con tin u ous water vapor retarder with a rating 
of one perm (6 x 10

-11

 kg per pa-sec-m

2

) or less with 

open ings gasketed or sealed and 

b.    weather stripping has been add ed on openable win-

 dows and doors and 

c.   caulking or sealants are applied to areas such as 

joints around window and door frames, be tween sole 
plates and fl oors, be tween wall-ceiling joints, be tween 
wall panels, at pen e tra tions for plumb ing, electrical, 
and gas lines, and at other openings.

       If your home meets all of the three criteria above, you 

must pro vide ad di tion al fresh air. See Ventilation Air 
From Outdoors
, page 5

If your home does not meet all of the three criteria above, 
proceed to De ter min ing Fresh-Air Flow For Appliance 
Lo ca tion, 
below. 

Providing Adequate Ventilation

Содержание Design Dynamics VTD-18N-BTB



























Отзывы: