901273-01D
9
9
For more information, visit www.desatech.com
For more information, visit www.desatech.com
INSTALLATION
Installing Grate and Logs
INSTALLATION
Continued
INSTALLING GRATE AND LOGS
1.
Place the grate over the burner pan where the two outer hori-
zontal supports on the grate fit into the two pan positioning
notches in the rear vertical edge of the pan.
2.
Slide the two rear log grate steps over the two outer horizontal
supports on the grate as shown in Figure 14.
3.
Place the back log on the grate onto the grate steps (see Figure 15).
4.
Place the front log(s) on the grate and slide forward against
the front bars on the grate (see Figure 15).
5.
Place the smaller top logs onto the bottom logs (see Figure 16).
Leave as much open space between logs as possible to mini-
mize flame impingement and sooting.
Note:
Logs may chip if
they are handled roughly or if hit together while being placed.
O
F
F
P
ILO
T
O
N
Figure 14 - Installing Grate (Pan Material Not Shown)
Grate
Grate Steps
Figure 15 - Installing Front and Back Logs (Number and style of
your logs may vary)
O
F
F
P
IL
OT
O
N
O
F
F
P
IL
OT
O
N
Arlington Round Oak Logs
Manchester Split Oak Logs
Figure 16 - Placement of Top Logs (Manchester Split Oak Logs
Shown)
O
F
F
P
IL
OT
O
N
