108114
For more information, visit www.desatech.com
For more information, visit www.desatech.com
16
INSTALLATION
Continued
Models VGX24NT, VGX24PT, VGX30NT, VGX30PT,
VGX24NR, VGX24PR, VGX30NR, VGX30PR,
EX24NR, EX24PR, EX30NR AND EX30PR
1.
Place log #1 (ember bed) onto the base. Position the log over
the shoulder bolts on either side of the front burner. The log
will sit on top of the front burner (see Figure 23).
2.
Place log #2 over the right portion of the back burner and onto
the two tabs on the right side of the base as shown in Figure 24.
3.
Place log #3 on the left side of the base. It will wrap around the
front end of the back burner and onto two tabs on the base (see
Figure 25).
4.
Place log #4 onto the tabs on the back of the base. It will lay on
the “ledge” on the back of log #3 (see Figure 26).
5.
Place log #5 onto the pins on log #1 (see Figure 27).
Figure 23 - Installing Log #1 [Ember Bed] (Model VGX30NT
Shown)
Figure 24 - Installing Log #2 (Model VGX30NT Shown)
Figure 25 - Installing Log #3 (Model VGX30NT Shown)
Figure 26 - Installing Log #4 (Model VGX30NT Shown)
Figure 27 - Installing Log #5 (Model VGX30NT Shown)
INSTALLATION
Installing Logs (Cont.)
