Desa CF18N, Руководство владельца по эксплуатации и установке

Страница: 19 / 40

19
101308
Right Front
Branch (#5)
Notches
Left Front Branch (#4)
(24" & 30" models)
or Front Branch (#4)
(18" Model)
Notches
INSTALLING
Continued
WARNING ICON G 001
WARNING
Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may
result in property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log when
installing. It is very important to install these logs exactly as instructed. Do not modify logs.
Only use logs supplied with heater.
1. Slide rear log (#1) into place behind rear burner (see Figure 16).
2. Slide front log (#2) into place behind front burner. Make sure tabs at bottom of log are
behind front burner (see Figure 17).
3. Place crossover log (#3) into place (see Figure 18). Be sure to place back of crossover
log into notch on left side of rear log. The indentation under front right fork of crossover
log must rest on rectangular knob of front log.
4. Place left front branch (#4) and right front branch (#5) (24" and 30" models) or front branch
(#4) (18" model) into place (see Figure 19). Make sure notches on bottom rest on grates.
5. Add lava rock around base of heater.
INSTALLING LOGS
Figure 16 - Installing Rear Log
Rear Log
(#1)
Crossover
Log (#3)
Figure 18 - Installing Crossover Log
Figure 19 - Installing Left Front
Branch and Right Front Branch
Figure 17 - Installing Front Log
Tab
Front Log
(#2)