Derytech Shepherd, Руководство пользователя

Страница: 26 / 47

DeryTech Shepherd -
Wireless Surveillance Camera Transmission System
User Guide | 26
Connection ID Input an ID of 1~ 8 hexadecimal characters [letters of the
alphabet (case sensitive) or numbers]. The Connection ID
cannot be left blank.
derytech
Wireless Setup
Transmit Range
(Km)
To select the approximate distance between the
transmitter and receiver for an improved transmission link
[Options: 1~10 kilometers].
10 Kilometers
Transmit Power To select the transmit power level. [Options: 1, 2, 3, 4, 5].
(In normal use, set to 5. When testing, if the TX and RX
units are very close (10m), reduce TX Power to avoid
signal saturation).
5 (maximum)
PTZ RS485 Setup (refer to the settings on your PTZ controller)
*No matter RS485 Full or Half duplex system you have, Just connect your system
to proper lines(refer page 11~14) and you only need one set setting here in
MagicLink
Baud Rate Options: 9600, 11.4K, 19.2K, 38.4K 9600
Data Bit Options: 7, 8 8