Evenup
®
is:
• To be used on opposite foot from TCC-eZ
®
or
Mede-Kast
®
.
• enables easier ambulation for some
casted patients.
Safety Precautions:
• Be careful! Your balance is likely compromised
due to your injury or surgery.
• Walk slowly with the evenup
®
to prevent falls.
• Do not walk on soft or uneven ground such
as sand, gravel, or grass while wearing
your evenup
®
.
• While wearing TCC-eZ
®
, with or without
evenup
®
, a four prong cane or walker might be
recommended.
• Always wear your evenup
®
securely fastened
to a shoe.
• Remove the evenup
®
from your shoe before
operating a motor vehicle.
• Recommended for use with laced oxford,
orthopedic shoes or sneaker.
Instructions:
Determine the thickness needed. The single
bottom sole is 1.3 cm thick. Adding the top sole
the evenup
®
will be 2.1 cm total in height. To join
the two layers using the Velcro, simply line up the
two strips on each sole and press firmly together.
Keep in mind, different shoes have different sole
thicknesses, one shoe may require both layers
while a different shoe may only require one layer.
1. Put on your evenup
®
while sitting down. Place
your good foot over your opposite knee. Place
the front portion of the evenup
®
strap over the
toes of your shoe.
2. Pull the elastic straps toward the heel of the
shoe and adjust the side straps over the sole
of the shoe. Pull up the heel tab to securely
fasten to the sole of the shoe.
3. Make sure the evenup
®
name is facing out.
4. Utilize the velcro strap provided to securely
fasten the evenup
®
to your shoe. Place the
strap through the loop and around the
thicker band.
®
