Derksen PHOS 40 outdoor, Руководство по эксплуатации

Страница: 4 / 16

4
Operating instructions PHOS 40 outdoor | V1.0 | 15. 10. 2015 Derksen Lichttechnik GmbH
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
• Please make sure that the mains cable is volt-free before connecting the device!
•
The waterproof connection tube must only be installed by a qualified electrician.
Please refer to the installation guide on page 12.
• The power cord must not be damaged. Ensure no strain or pressure is put on the
power cord. The power cord should not be bent, stretched, twisted or pinched. A
damaged power cord can cause electric shock or fire and must be replaced
immediately.
• Verify that the voltage of the electricity supply system and the voltage of the device
are compatible. To this end take note of the type label on the projector.
• Operate the unit only when completely assembled.
• If you hear unusual noises, see smoke or strong odor strikes, pull the power plug
immediately and contact your technical service. Continued use could result in
electric shock or fire.