Se�ngs
10 / 20
Derksen Lich�echnik
5.1. Inser�ng/changing the projec�on
mo�f (gobo)
1.
Loosen the knurled screw.
2.
Entnehmen Sie den Gobohalter.
5. Se�ng up and opera�ng the projector
•
Carefully remove the casing from the projector head.
Some of the steps below require the projector to be switched on. Op�cal radia�on can cause high temperatures at
close range and may be dangerous for your eyes. Exercise appropriate cau�on. Only switch on the projector once the
gobo has been inserted. Carry out set-up work as soon as possible a�er switching on the device.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
