Se�ngs
En
gl
is
h
PHOS 15 LT
25 / 48
5.1. Inser�ng/changing the
projec�on mo�f (gobo)
1.
Loosen the knurled screw.
2.
Remove the gobo holder.
5. Se�ng up and opera�ng the projector
•
Carefully remove the shell from the projector head.
Some of the steps below require the projector to be switched on. Op�cal radia�on can cause high temperatures at close
range and may be dangerous for your eyes. Exercise appropriate cau�on. Only switch on the projector once the gobo has
been inserted. Carry out set-up work as soon as possible a�er switching on the device.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
