Derksen USA PHOS mini LT, Руководство по эксплуатации

Страница: 4 / 16

4
Operating Instructions PHOS mini LT | V1.1 | 04. 09. 2014 Derksen Lichttechnik GmbH
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
• Disconnect the lighting track system from the mains before you install or remove the
LED projector or make modifications to the system.
• Verify that the voltage of the electricity supply system and the voltage of the device
are compatible. To this end take note of the type label on the projector.
• Operate the device only with the housing closed completely.
• The device may only be used in dry, closed rooms. Do not operate the device in a
humid environment or near dripping or splashing water.
• Do not place any containers with liquids next to the device, such as flower vases or
drinks. If the device comes into contact with any liquids it may result in electric shock
or fire.
• If, despite all precautions, liquid is spilled into the unit, it must immediately be
disconnected from the mains. Do not touch the housing - ingress of liquids may
cause an electric shock! Turn on the power again, if you are sure that the device is
thoroughly dried.
• If you hear unusual noises, see smoke or strong odor strikes, disconnect the track
from the mains immediately and contact your technical service. Continued use could
result in electric shock or fire.