Derbi GP1 50 cc, Руководство по ремонту

Страница: 62 / 138

61
R
EMOVING THE CYLINDER
-
PISTON ASSY
- Carefully remove the cylinder.
- Remove the split rings and the wrist pin.
CAUTION
ALWAYS REPLACE THE WRIST PIN SPLIT RINGS WITH NEW
ONES
I
NSPECTING THE SMALL END
- Using an inside micrometer, measure the small end dia-
meter
N.B.
IF THE SMALL END DIAMETER EXCEEDS THE MAXIMUM ALLO-
WABLE VALUE, OR IF IT SHOWS SIGNS OF WEAR OR OVER-
HEATING, PROCEED TO REPLACE THE CRANKSHAFT AS DES-
CRIBED IN THE CHAPTER “CRANKCASE AND CRANKSHAFT”.
Characteristic
Standard diameter
17+0,011-0,001
Max. allowable diameter
17,060
I
NSPECTING THE WRIST PIN
- Check the wrist pin external diameter using a micrometer.
Characteristic
Wrist pin: standard diameter
12
+0,005+0,001 mm
R
EMOVING THE CYLINDER PISTON ASSY
I
NSPECTING THE SMALL END
I
NSPECTING THE WRIST PIN