DEPURECO RAM 1000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 100 / 113

21
To proceed with the expulsion of liquids , follow the steps below:
- turn the switch (3) to “O”
- as shown in the figure below, turn the handle (5) to open the drain valve
- to start the expulsion of liquids, tun the switch (4) LIQUID EXPULSION ON/OFF to “I”
- to stop the expulsion, turn the switch (4) to “O ”.
During the liquid expulsion phase, upon reaching the minimum liquid level inside the tank, the machine will
stop automatically.
To proceed with suctioning the liquid, turn the switch (4) to “O” and proceed as indicated above.
It is possible to use the vacuum continuously, consequently, it will be possible to expel liquid from the tank
during the vacuum phase.
If you need to stop the vacuum/expulsion of liquids, press the red mushroom button (2) EMERGENCY STOP
For convenience, wrap the drain hose around the hook (detail no. 6, par. 1.1) and to move the vacuum, use
the handle (detail no. 9, par. 1.1) located on the side of the tank
Caution!
Never use the vacuum cleaner with the filters clogged.
Warning!
Do not use the vacuum in liquid expulsion mode with the drain valve
closed. In this mode, the non-expulsion of liquids could damage the
pump inside the tank
5