DEPURECO M 100 OIL Series, Руководство по эксплуатации и обслуживанию, Страница: 31 / 39

Page 32 of 40
To reassemble the filter , operate in reverse order:
- Insert the suitably washed oil mist filter sponge or a new sponge inside the cage
- If previously the cage complete with filter sponge has been removed from the appropriate
support, screw the cage to the latter
- Insert the filter support inside the filter chamber
- With the help of a second person, place the suction head on the filter chamber, then lock the
head with the appropriate closing hooks
- Connect the vacuum cleaner to the electricity supply
- Turn on the vacuum cleaner and immediately evaluate its regular operation
5.4 Washing or replacing the washable filter
To wash or replace the washable filter, proceed as follows:
- Switch off the machine and wait for the motors to stop completely
- Disconnect the vacuum cleaner from the power supply
- Release the container by lifting the special handle
- Remove the container from the vacuum cleaner, using the handle
- Remove the internal cage (complete with float) from the container
- Extract the basket (complete with washable internal filter) from the inside of the container
using the handles on the sides
- Empty the basket from the debris inside and remove the washable filter from inside it
- Wash the filter with water. If washing does not eliminate the cause of clogging it must be
replaced
Remove the filter, insert it inside a plastic bag, close it and dispose of it
according to the laws in force for the type of material being suctioned
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).