Page 35 of 41
-
Loosen the fastening clip (
H
), remove the filter from its support and, using scissors, cut the
lower belts that clamp it to the filter’s cage
Remove the filter, put it in a plastic bag, seal it and dispose it of according to the
current legislation on the type of material extracted
To reassemble the filter
, operate in reverse order:
-
Insert the new filter in the support ring and lock it by means of the fastening clip (
H
)
-
lock the filter to the cage by tying the special laces on the bottom side
-
Insert the filter complete with support ring into the chamber and pay particular attention to the
alignment of the cage with the manual filter shaker
-
with the help of a second person, position the vacuum’s head over the filter chamber, but
before resting it completely on the chamber connect the compressed air cables (
E
) of the
filtering unit to the head, then position the head on the chamber
-
tighten the locking hooks (
D
)
-
connect the hose (
C
) again to the lid and tighten it with the clamp (
B
)
-
connect the two compressed air cables (
A
) and connect the vacuum to the mains power supply
-
turn the vacuum on, immediately assessing its correct operation.
EXCLUSIVELY USE FILTERS MANUFACTURED BY DEPURECO
Содержание DF 22
