11
2.2 Safety measures
Warning!
The following information is important for the prevention of all hazards which may
occur during vacuum operation. However, they cannot replace the expertise and
common sense of operators as an overall framework for the prevention of accidents.
Each section lists further safety measures specific to
the various functions.
CAUTION!
• This vacuum may only be used by suitably trained adults.
• This vacuum cleaner is intended for industrial use, e.g.:in factories, warehouses, workshops.
• Ensure that mains electrical connects have suitable earthing.
• This vacuum cleaner should not be used in corrosive or potentially explosive atmospheres.
• Keep the vacuum cleaner clear of foreign objects such as debris, oil, tools and other objects which may
impede its functioning and cause personal injury.
• Avoid the use of toxic or inflammable solvents, such as petrol, benzene, ether and alcohol for cleaning.
• Avoid prolonged contact with solvents and inhaling their vapours.
• Avoid using near open flames or heat sources; ensure adequate ventilation.
• Never use the vacuum cleaner without a filter.
• Do not vacuum lit cigarettes: the filter may catch fire.
• Do not vacuum petroleum products or inflammable liquids in general.
• Ensure that all protection equipment and guards are in place and that all safety devices are present and
operating.
• Do not wear loose or flowing apparel such as ties, scarves, or torn clothing that could become hung or
caught up by the vacuum cleaner.
• Never open waste container while the vacuum cleaner is working.
• Never put hands inside the container positioning guides: the movement of the lifting handle could lead to
fingers being crushed.
• Never use extension leads, plug-in connection devices and adapters.
• Do not climb on the vacuum cleaner.
• Do not touch electrical wires, switches, buttons, etc. with wet hands.
• Occasionally check the integrity of the power cable.
• When using the industrial vacuum cleaner, some components (motor connector, motor body in particular)
may reach high temperatures.
• During operations to return to original work conditions, the personnel in charge must ensure at the end of
the procedure that normal operating and safety conditions of the vacuum and, in particular, of the safety
devices and protective guards involved in the operation are once again guaranteed.
• Should the Customer install a tool not supplied by DEPURECO on the vacuum, the safety requirements of
Machinery Directive 2006/42/EC must be met. Nevertheless DEPURECO shall not be held liable for
problems caused by the use of such parts.
