Denyo DCA-13ESK Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 47

Denyo DCA-13ESK Скачать руководство пользователя страница 9

5

CAUTION

Stacking

■

Improper stacking of machines may cause falling or

dropping accidents. When stacking other machines on this
machine, be sure to observe the following points.

* Check that the bonnet of the machine is free from damage and that

the fixing bolts are not loosened and missing.

* Put the machine horizontally on a solid foundation which

withstands the weight of stacked machines.

* Machines can be stacked up to 2 stages. The weight and size of

stacked machines should be less than those of this machine.

* Using square timbers as shown right, put each machine making

sure that the weight is even.

■

Do not operate the machines in the state of stacking to prevent

falling or dropping accidents.

CAUTION

HOT

PARTS

can

burn

skin.

■

High temperature units are located in the machine.

(Note that these units are very dangerous if they are used
incorrectly.)

* Be sure to close the door and lock it during operation.
* If the door needs to be opened during operation, do not get your

hands and head in the machine to prevent unexpected burns.

* When making check or maintenance of the machine, be sure to

stop the machine.

* The bonnet is still hot even after the machine is stopped. Be

careful until the engine is completely cooled.

«
...
7
8
9
10
11
...
»

Содержание DCA-13ESK
















































Отзывы:

Нет отзывов