Denver WTA-448, Руководство пользователя

Страница: 8 / 9

ENG 8
To set the roger beep:
.
Press the MENU button (11) six times: "rO" will be displayed.
. Press to enable (ON) or to disable the roger beep ( OF ).
. Press the TALK button (15) to confirm your selection and return to standby mode.
14. Button lock
Press and hold the MENU button (11) for two seconds to activate the button lock mode. The button lock icon
appears on the LCD screen.
Press and hold the MENU button (11) again for two seconds to deactivate the button lock.
Note: The PTT button (15), Call button(12), MON button(5), Lamp button (20), and the on/off button (6) will still be
functional when the button lock is activated.
15. Display backlight
To activate the backlight of the LCD screen, press any button except the on/off button.
The LCD backlight will turn on for 5 seconds.
16. Earpiece connection
The Twintalker can be used with the included earpiece.
The connector is located on the upper side of the device (8).
Insert the earpiece plug into the connector (2.5 mm jack).
The small button on the earpiece has the same function as the TALK button (15) on the device.
When you use the
TALK button (15) from the earpiece, you must also use the microphone from the earpiece to
talk into.
Note: Do not connect other earpieces. This may damage your device.
17. Battery saving function
When the device has not been used for seconds, the economy mode is activated automatically. This does not affect
the reception of transmitted messages, and the standard mode is re-activated automatically once a signal is
detected.
18. BUILT-IN FLASHLIGHT
As an added feature, your radio has a built-in flashlight that can be used to send light signals or for its direct
purpose.