Denver WS-650, Руководство пользователя

Страница: 8 / 12

unit’s display
To repeat the search, or press and hold the TX button(49) on the temperature/humidity/ wind sensor. You find
the TX button under the battery cover.
Placement of sensors
To ensure correct measurements, the temperature/humidity /wind sensor and the rain gauge sensor must be
placed at least 1.5m above the ground on a horizontal surface without buildings and structures nearby.
Mounting
Both sensors must be firmly attached to prevent them from falling and being damaged.Do not place the
sensors onto metal objects as this will reduce their transmission range.
To assemble and mount the temperature/humidity/wind sensor, begin with screwing the mounting base (51)
onto a level surface. Place the mounting rod(50) in the base and fasten it with two screws. Put the
temperature/humidity/wind
Sensor on top of the rod. Before fastening it, make sure that the wind can flow freely around the wind sensor
from all sides. Check that the wind cups and wind paddle(48)for measuring wind speed and directino can
rotate freely.
Improtant. To make sure that the wind direction is measured correctly, it is important that you install the
temperature/ humidity/wind sensor in north-south direction using the built-in compass(47).The part with the
wind cups and wind
Cups and wind direction paddle should face south. See picture.
When you have aligned the temperature/ humidity wind sensor in north-south direction, fasten the sensor to
the mounting rod with two screws. Lastly, mount the rain gauge sensor by screwing it onto a suitable surface
and place the grille (45) in the sensor.
Weather forecasts
The weather station will start a 14- day learning process once turned on and set up. This learning process is
necessary for the weather station to be able to make weather forecasts. The display will show “LEARNING...“ at
The top of the display during this time.