OPERATIONS
LISTENING TO RADIO
MANUAL TUNING
1. Turn on the unit by the POWER/VOL knob (9) and slide the Function switch (4) to the
TUNER position.
2. Turn the TUNING knob (7) to tune to a radio station. The FM frequency pointer (11)
indicates the current FM frequency.
3. Adjust the POWER/VOL knob (9) to change volume level.
STEREO PHONOGRAPH OPERATION
Before First Use:
-
Remove the stylus protector.
-
Make sure that the tone arm is unlocked and free to move from
the tone arm rest prior to operating. Lock the tone arm again
when not in use.
EN
Cartridge
Stylus
assembly
1.
Slide the Function switch (4) to the PHONO position.
2.
Raise the turntable dust cover.
3.
Place the record on the platter. Use the 45 RPM record adaptor (12) if you are playing
45 RPM records.
4.
Set the speed selector (13) to the proper position for the record you are playing.
5.
Lift the tone arm from the rest (15) and slowly move it over the record. The platter
begins spinning.
6.
Place the tone arm down onto the record, in a particular
position that you want to play.
7.
Adjust the POWER/VOL knob (9) to change volume.
8.
When the tone arm reaches the end of the record, the play
automatically stops.
9.
To stop playing manually, lift the tone arm from the record and return it to the rest.
NOTE:
Some types of records may have an auto-stop area outside the preset limit,
so the turntable may stop before the last track finishes. In this case, set the
AUTO-STOP switch to the “OFF” position. This allows the record to play to the end,
but please note that it will not stop automatically. You must manually raise the tone
arm and place it back in the rest and then turn off the power to stop the turntable from
spinning.
English - 3