14. Aux in
15. Line out R channel
16. Line out L channel
17. DC power jack
INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a mains voltage of
5V DC adaptor
.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may
wish to connect it to your existing Hi Fi system. Connect the audio plugs to the
Line input on your mixer or amplifier using an RCA cable (not supplied)
Red plug into R/H channel input.
White plug into L/H channel input.
Playing a record
-
Place the record of your choice on the turntable. If required, do not forget to
place the adaptor on the record spindle.
-
Choose the desired playing speed using the speed selection switch
between 33.3, 45 and 78rpm.
-
Turn on the Rotary Power Switch, note that this also controls volume.
-
Release the tone arm lock.
-
Raise the arm with your hand lightly.
-
Place the stylus vertically over the first track of the record, the turntable will
start turning automatically.
-
Put down the stylus slowly on to the record to play.
-
When a record comes to the end, it could be controlled by auto-stop