The lighting flash with arrow head within a
triangle is intended to tell the user that parts
inside the product are a risk of electric shock
to persons.
The exclamation point within a triangle is
intended to tell the user that important
operating and servicing instructions are in
the papers with the appliance.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE
AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING
: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The following illustrations represent the
precautions to be taken when using and moving
your television:
1.
Do NOT expose the television to
extreme temperature conditions
(below 5
¡ã
C and above 35
¡ã
C) or
to
extreme humidity conditions (less
than 10% and more than 75%).
4.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
Warning
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance with the CE Rules could void the
authority to operate this equipment.
use s
,
2.
Do NOT expose the television
to direct sunlight.
3.
Do NOT expose the
television to any liquids.
5.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
6.
If the remote control is not used
for a long period of time, remove
the batteries and store it in a cool,
dry place.
7.POWER-CORD PROTECTION
- Power supply cords should be routed
so that they are not likely to be
walked on
or
pinched
by
items placed
upon
or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
appliance.
8.POWER LINES
- An outside antenna system should not be located in
the vicinity of overhead power lines, or other electric light or power
circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be
taken to
keep from touching such power lines or circuits as
contact with them might be fatal.
9.OVERLOADING
- Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
10.OBJECT AND LIQUID ENTRY
- Do not push objects through any
openings in this unit as they may touch dangerous voltage points or
short out parts that could result in fire or electric shock.
Never spill or spray any type of liquid into the unit.
11.OUTDOOR ANTENNA GROUNDING
- If an outside antenna or cable
system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and
built-up static charges. Section 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
12.SERVICING
- Do not attempt to service this unit yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Warning
2
13.DAMAGE REQUIRING SERVICE
- Unplug this unit from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is
damaged.
B. If liquid has been spilled, or objects have fallen
into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by
following the operating
instructions. Adjust
only those controls that are covered by the
operating instructions, as an improper
adjustment of other
controls may result in
damage and will often require extensive work
by a qualified technician to restore the unit to
Its normal operation.
E. If the unit has been dropped or the cabinet has
been damaged.
F. When the unit exhibits a distinct change in
performance, this
indicates a need for service.
14.REPLACEMENT PARTS
- When replacement parts are required,
be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock or
other hazards.
15.SAFETY CHECK
- Upon completion of any service or repairs to
this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
16.HEAT
- The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products(including
amplifiers) that produce heat.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC - NATIONAL ELECTRIC CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE S2898A
