Denver TSP-303, Руководство пользователя, Страница: 8 / 156

EN-6
-
Press the "Source" Button and select
LINE, LINE will show on the RED LED
display.
- Plug in your 3.5mm cable into the
LINE IN put on the side panel and the
unit will enter into LINE IN mode.
- You can connect any audio device
that has 3.5mm audio output jack and
playback any audio from the
connected device.
-
Smartphones recharging works on
both AC power and DC power.
CAUTION: When the low battery red
indicator lights up, that means
product needs to be recharged and
smartphones recharging can only be
done by AC power adaptor.
-
Plug in the Power AC Adaptor to the
wall outlet.
-
Plug in your smart phones/tablets
USB recharging cable into the side panel marked "1A charger".
- Connect the recharging cable to your smart phones/tablets. Recharging starts.
- Unplug your USB recharging cable when your smart phones / tablets are fully
recharged.
This jack is only designed for charging devices requiring 5V and 1A.
Otherwise it may lead to damage.
- This product allows you to sing-a-long with
the songs playing either on BT, USB or LINE
IN mode and allow 2 microphones at the
same time.
- Plug in your Microphone cable into the side
panel marked "MIC 1" and /or "MIC 2".
-
Adjust the MIC Volume "MIC + / MIC – " or
main volume on the top control panel.
-
Adjust the Echo level " EH + /EH – ".
-
Start to sing
SMART PHONES/TABLETS RECHARGING
SING-A-SONG
LINE IN
POWER
LINE IN DC JACK
USB 1A CHARGER
MIC 1
ON OFF
MIC 2
1
2