Denver TSP-203, Руководство пользователя, Страница: 8 / 156

EN-6
-
Press the "Source" Button and select
LINE. LINE will show on the red LED
display.
-
Plug in your 3.5mm cable into the LINE
Input on the back panel and the unit
will enter into LINE IN mode.
-
You can connect any audio device that
has 3.5mm audio output jack and
playback any audio from the
connected device.
-
This product allows you to sing-a-long with
the songs that are playing either on BT,
USB or LINE IN mode.
-
Plug in your Microphone cable into the side
panel marked "MIC"
-
Adjust the MIC Volume "MIC + / MIC – " or
main volume on the top control panel.
-
Adjust the Echo level " EH + /EH – ".
-
Start to sing
WARNING: - If the MIC Volume and
ECHO level set too high or to the
maximum, be caution with the high
pitch reflection tone.
- " Customer’s model " has a built in Equalizer
-
Press and select the preset sound effect for your music; FLAT, CLASSIC, POP,
ROCK and JAZZ
General
No power
-
Check that AC adaptor is securely inserted in the unit and the electrical outlet.
-
Check the Power On/Off switch is turn to On position.
-
If battery is flat Plug in the AC adaptor to charge and operate.
Keys no response
-
Turn the Power On/Off switch to Off, and then On again to reset the unit.
-
Unplug the AC adaptor and plug it back again.
SING-A-LONG
SOUND EFFECTS
TROUBLESHOOTING
MIC - MIC +
EH + EH -
LINE IN