10
color . Press the POWER or STANDBY button again to switch off the
power, and the light will be in red color.
2. The Picture setup, Sound setup, Previous channel can be memorized
before you switch off the TV/Monitor. The TV/Monitor will re-start under
the previous state when you switch on it again.
3. Press the V - or V + button to adjust the volume output. Press the V -
button repeatedly to decrease the volume; press the V + button
repeatedly to increase the volume from 0 to 100.
4. Press the SLEEP button to set the sleep time as 15,30, 45,60, 90, 120
minutes or off.
(2) View the TV plays.
1. Press the TV/AV button on the unit or the remote control to select the
TV function mode. The TV will appear the initial channel ‘1’ on the top
right corner when the function is on. Press the P- or P+ button to select
the previous or next channels; or press the 0-9 buttons to enter a
channel number directly, or press the -/-- button until the screen
display ‘--’ or ‘---’, then use the 0-9 numerical buttons to enter a
channel number from 10 to
200.
2. Press the RECALL button on the remote control to select from the
present channel and the previous channel.
3. Press the PP button to select picture mode from the below 4 types
4. Press the MUTE button to cut off the sound output, then the screen will
show “ “ mark , press this button again to resume sound output..
5. Press the DISPLAY button to display the preset channel mode.
(3) View the AV signal sources (DVD/VCR/CAMCORDER)
Press the TV/AV button on the remote control, there will be a menu
displayed on the screen as followed:
User
Normal
Soft
Vivid