Denver TDC-250, Инструкция по эксплуатации

Страница: 8 / 20

14. TAPE PLAYING BUTTONS
15. FM ANTENNA
16. HANDLE
17. CD DOOR
18. HEADPHONE JACK
19. USB JACK
20. AUX-IN JACK
21. AC SOCKET
22. BATTERY COMPARTMENT
Turn on the unit
• Press the “STANDBY/FUNCTION” button to turn on the device.
•
Press the “STANDBY/FUNCTION” button for approx. 3 seconds to switch into the standby mode.
Power Supply
•
This boombox can be used with the supplied power cable or with 6 x size “C” batteries (batteries
not included)
•
Setting the clock & date
The system must be in standby mode in order to set the clock.
1. Press and hold the “ENTER/PLAY/PAUSE/CLOCK” button for approx.2 seconds.
2. Use the “SKIP+/” or “SKIP-/TUNING-” buttons to set the time format “12/24hr”.
3. Press the “ENTER/PLAY/PAUSE/CLOCK” button to confirm.
4. Use the “SKIP+/” or “SKIP-/TUNING-” buttons to set the hours.
5. Press the “ENTER/PLAY/PAUSE/CLOCK” button to confirm the hour.
6. Repeat step 4 and 5 to set the minute/date.
Setting of the alarm time
The system must be in standby mode in order to set the alarm.
You have the option of setting two alarms. Proceed as follows:
1. Press the “VOLUME-/ALARM 1” button for about 3 seconds. The hours will start to flash.
2. Set with the “SKIP+/” or “SKIP-/TUNING-” buttons.
3. Press the “VOLUME-/ALARM 1” button to confirm. The minutes will flash.