• BUZZ
:
A buzzer will sound when reaching the alarm timeu
6u Finally, press the
“SKIP+ / ” & “SKIP- / TUNING-” buttons to set the alarm volume
u Press the “VOLUME- /
ALARM 1” to confirmu
To set the second alarm time, repeat each of the above steps with the “ / ALARM 2” buttonu
In order to deactivate the alarm function, press the “VOLUME- / ALARM 1” or “ / ALARM 2” buttonu
Snooze
The automatically set alarm function can be switched off for 9 minutes with the “
SLEEP / SNOOZE” button.
Sleep
1.
Press the “
SLEEP / SNOOZE” button to enter.
2.
Press the
“
SLEEP / SNOOZE”
buttons to set SLEEP time (120, 110, 100
。。。
10, 5, OFF) and press “ENTER /
PLAY / PAUSE / CLOCK” button to confirmu
3.
To cancel SLEEP, follow above step 1 to 2 and set the SLEEP time to “OFF”u
Listening to the
DAB
1.
Select the .AB mode with the “STAN.BY / FUNCTION”
button,
until “.AB” is shown in the displayu
2.
The device automatically searches for DAB stations.
3.
You can select the next or the previous station by using the
“
SKIP+ / ” & “SKIP- / TUNING-” buttonsu
NOTE:
• If the reception is too weak, try to improve the reception by changing the position of the antennau
Scan DAB station
1.
Press the “STAN.BY / FUNCTION”
button,
until “.AB” is shown in the displayu
2.
Keep the “AMS / MO.E” button pressedu The device will start the station scanu
Save Station
1. If you have found the desired station, press the “AMS / MODE” button. The first preset location appears on the display. If
the preset location is still empty the word EMPTY appears under PRESET STORE.
2. For choosing the memory position, please press
“SKIP+ / ” & “SKIP- / TUNING-”
buttons.
3. Press the
“ENTER / PLAY / PAUSE / CLOCK” button
to save the settings.
Select a preset station
1. Press the “PRE. / FOLDER” button to choose a memory position.
Display additional DAB information
In DAB mode, you can display the following additional information if broadcast by the radio station. To do so, press the
“INFO” button.
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves complementary data. This content may be e.g. Information about the
station or the music title and artist being played. If information on the track title is transmitted by the station, you can display
this information with the “INFO” button.
• Displays the received signal strength.
• This indicates the station category (e.g. Pop-Music, News etc.).
• Displays the name of the station group.
• Frequency of the current radio station.
• The “SIGNAL ERROR” display shows the signal quality.
The lower the adjacent figure, the better the quality.
• Displays the digital Audio Bit Rate.
• Display the time.
• Display the date.
Listening to the
FM
Radio
1u Select the RA.IO mode with the “STAN.BY / FUNCTION
” button,
until “FM” is shown in the displayu
2u
For FM reception: Completely extend the telescopic antenna.
Change its position to improve the receptionu
3u There are two options to search for and preset radio stationsu
• Automatic scan:
Important!
Any preset radio stations will be overriddenu
Press and hold the "AMS / MO.E" button for approxu3 secondsu The system scans the entire frequency band for radio stationsu
Any stations found will be preset from lowest to highest frequencyu
•Manual scan for audio stations:
Briefly press the “SKIP+ / ” & “SKIP- / TUNING-” buttons, until you have found the radio station which you are
looking foru If you keep one of the buttons pressed down, the device will search to the previous, respectively next radio stationu
Preset station:
1u Press and hold the "AMS / MO.E" button on unit for about 2-3 seconds to start the automatic preset processu
2u .isplay will show the memory sequence number and radio stations will be automatically preset into the sequence number
(Note: Each sequence number means 1 preset station while during automatic preset processu)
