English - 6
the first program “
” will light up and blink continuously.
Press the CD SKIP/SEARCH
or SKIP/SEARCH
BUTTON to your
desired musical track, the CD LCD DISPLAY will show the appropriate
track number. Press the PROGRAM BUTTON to store this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed.
A total of 20 tracks can be stored in memory.
Remarks :
Whenever CD SKIP/SEARCH FORWARD or
BACKWARD BUTTON is pressed, it will always
show the last programmed track first to recall
your memory.
After complete programming, LCD DISPLAY will show “PROGRAM_ _ _”
and flash continuously.
3.
Press the CD PLAY/PAUSE BUTTON once to start
the program playback and the CD Play Indicator
“
” will light up.
4.
To check the program you have stored after
complete programming, press the PROGRAM
BUTTON once during CD stop mode, then press
the CD SKIP/SEARCH FORWARD BUTTON once, the LCD DISPLAY will
show the first programmed track number. Repeat above procedure to
read all the programmed memory.
5.
To cancel the programmed memory :
During the CD stop mode, press the CD STOP BUTTON once.
OR
Open the CD DOOR during the CD stop mode.
The Program Indicator “
” will disappear from the LCD DISPLAY.
PLAYING MP3 DISC
Getting Started
Note:
Should skipping of tracks occur during MP3 Disc playing, try turning
the volume down.
When MP3 disc is playing, do not open the CD DOOR.
1.
Open the CD DOOR by pulling up the CD DOOR. Put a MP3 disc into the
CD compartment and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
Note :
Ensure the CD DOOR is closed properly and locked in place.
2.
When the CD DOOR is closed with a MP3 disc
inside, total number of the tracks in the disc will be
shown on the CD LCD DISPLAY and go to stop
All manuals and user guides at all-guides.com
all-guides.com
